You can use Scene Viewer on mobile devices and in desktop web browsers that support WebGL, a web technology standard for rendering 3D graphics. For best results, verify that your mobile device, browser, and hardware meet the Scene Viewer requirements.
Browser requirements
Scene Viewer supports the latest versions of the following browsers:
- Chrome
- Firefox
- Microsoft Edge
- Safari*
Note:
Internet Explorer 11 and Edge Legacy are no longer supported. Please use the latest versions of the browsers listed above.
The latest versions of the most common desktop browsers have built-in WebGL. To test whether your browser has WebGL enabled, open get.webgl.org. To troubleshoot WebGL-related issues, visit WebGL troubleshooting. Make sure you keep your browser up to date as WebGL is an evolving technology and each browser version brings improvements that Scene Viewer uses for optimal performance. To use Scene Viewer, your browser should have hardware acceleration enabled.
Tip:
- For best performance, it is recommended to use 64-bit browsers.
- Adjust the performance-quality settings in your browser to optimize performance or quality in your scene.
Additional WebGL requirements
In addition to basic WebGL support, Scene Viewer has the following requirements for WebGL:
- High precision fragment shaders
- Vertex shader samplers
- Uint vertex indices (OES_element_index_uint extension)
You can verify your browser meets these requirements at www.webglreport.com. To get more detailed information about WebGL requirements, visit the khronos.org WebGL wiki.
Hardware requirements
For best performance, it is recommended that your browser have a minimum of 8 GB system memory and modern graphics hardware for 3D.
Minimum requirements are a high-performance graphics card with at least 512 MB of video memory. For the best performance, it is recommended that you have a graphics card with at least 1 GB of video memory, especially for working with larger or more memory-intensive 3D scenes. High-performance, stand-alone graphics cards typically have better performance than integrated graphics cards.
Mobile requirements
Scene Viewer offers mobile support for the following:
- iOS Safari on iPhone XS, iPhone 11, iPhone 12, iPad Pro 10.5-inch (2017) and later
- Android Chrome on Samsung S9, Samsung S10, Samsung S20, Samsung Tab S4 and later
*Water reflections of terrain and 3D objects aren't supported on iOS devices.
If you're using a mobile device other than those listed above, your device should have a minimum of 2 GB of RAM (4 GB recommended), a powerful multi-core processor and GPU, and the latest Android or iOS version installed.
Portal for ArcGIS Web Styles installation
Esri provides a growing set of 3D models to symbolize points in your scenes. Consequently, a limited set of 3D models (Basic Shapes) is installed by default in the symbol gallery. For ArcGIS Enterprise 10.7.1 and later, to get the complete set of 3D symbology in your symbol gallery, such as Vegetation, install Portal for ArcGIS Web Styles. The Web Styles setup is available for download from My Esri.
When you install ArcGIS Enterprise using ArcGIS Enterprise Builder, the Web Styles component is automatically installed. Otherwise, install Web Styles after all other ArcGIS Enterprise components have been installed.
Troubleshoot rendering problems
Scene Viewer requires optimal browser functionality to perform properly. You will see a message that states there is a problem loading Scene Viewer when Scene Viewer detects that rendering in your browser is compromised. The error message gives additional details as to the nature of the problem:
- Your browser isn't using hardware acceleration for rendering
- Your browser doesn't seem to support WebGL
Additionally, Scene Viewer may open without an error message but the rendering quality is still compromised.
Your browser isn't using hardware acceleration for rendering
When Scene Viewer doesn't detect hardware acceleration in your browser, this message appears. Common reasons the hardware acceleration isn't enabled can be that your browser settings aren't configured properly or the browser has blocked your graphics card.
Configure hardware acceleration in your browser settings
Each browser has its own configuration options, and the hardware acceleration may be disabled. To enable hardware acceleration for rendering in your browser, see below.
For Chrome, do the following:
- In the browser menu, go to Settings > Advanced > System.
- Click the Use hardware acceleration when available toggle key.
- Click the Relaunch to restart your browser.
For Firefox, do the following:
- In the browser menu, go to Menu > Options > System.
- Click General.
- Under Performance, check the Use recommended performance settings check box.
- Restart your browser.
For Microsoft Edge, do the following:
- In the browser menu, go to Settings > System.
- Click the Use hardware acceleration when available toggle key.
- Click Restart to restart your browser.
Your browser has blocked your graphics card
Some browsers determine that a specific graphics card doesn't meet the requirements of the browser and block the graphics card. In this case, you still have the option to bypass the browser's decision to block your graphics card. Although this is not always recommended, it may resolve the issue in Scene Viewer.
For Chrome, do the following:
- Type chrome://flags in the address bar.
- Click Enable under Override software rendering list.
- Restart your browser.
For Firefox do the following:
- Type about:config in the address bar.
- Type webgl.force-enabled in the search bar.
- Set the value to true.
- Restart your browser.
Your browser doesn't seem to support WebGL
This message appears when Scene Viewer doesn't detect WebGL in your browser. A good way to confirm this is to go to get.webgl.org. You should see a spinning cube to confirm WebGL is available in your browser. Otherwise, the website indicates your browser doesn't support WebGL. If you don't see a spinning cube, you can try the following:
- Ensure WebGL is enabled through your browser settings.
- Ensure that your browser and hardware meet the Scene Viewer requirements.
Scene Viewer opens but the rendering quality is compromised
Sometimes Scene Viewer opens without an error message, but you still may experience a problem. Some examples are the following:
- All icons and labels are missing, but they display in another browser or device.
- Rendering artifacts (for example, atmosphere and shadows rendering in black, geometry rendering with dots).
- Major color problems exist in the scene (for example, all colors are inversed, all colors render green or black).
If you are experiencing any of the above issues, confirm the following:
- Your browser has hardware acceleration enabled.
- Your browser has WebGL enabled.
- Your browser and computer meet all the Scene Viewer requirements.
If you still see an issue in Scene Viewer, try switching to another browser. Another option is to update your video driver. It is recommended that you go to the vendor's website to download the latest driver. Finally, if all the above suggestions haven't fixed the problem, report your problem in the Esri Community forums or contact Esri Technical Support for additional help.